Available in sizes  150 | 175 | 215 | 255  LITRES

A direct thermal store cylinder for use in an electric only installation

The Plumbing Group are at the forefront of water heating technology. We are changing the way you think about water heating installations.  The ThermaCoil is a mains pressure open vented thermal storage system. It does not require safety valves and has no external discharge requirements.

ThermaCoil thermal storage systems works by reversing the function of the Primary (Heating) and Secondary (Domestic) water. The Primary water is stored in the cylinder and heated by either a boiler (indirect) or immersion heaters (Direct). When heated by a boiler, the water can also be pumped around either a wet central heating system or an under-floor heating system.

The Secondary water comes directly from the mains and passes through a specially designed finned heat exchanger coil which draws heat from the ThermaCoil. This water then passes through a thermostatic mixing valve which blends the water to the correct temperature before it reaches the taps.

Available in four sizes ranging from 150 litres through to 255 litres. Our largest model is capable of satisfying the hot water demands of a property with 4 bedrooms, 1 bathroom and 1 separate shower room.

All models are pressure tested to 10 bar and come complete with two immersion elements and a TMV 2/3 blending valve.

The direct model comes complete with two immersions, one for on-peak use and one for off-peak use. This allows the store of water to be heated utilising off-peak electricity, making the unit extremely efficient.

ThermaCoil Direct Thermal Store Heat Loss Performance

Features of a ThermaCoil Direct Thermal Store

• 10-Year cylinder and 3-Year parts warranty
• No risk of legionella.
• Sizes 150L to 255L capacity
• Cylinder manufactured from high grade Duplex stainless steel
• 60mm fire retardant insulation minimising heat loss
• 100% CFC/HCFC free
• Long life with no internal moving parts
• No external expansion vessel, quicker installation
• 3 Bar pressure at outlets
• All sizes WRAS approved
• Designed & manufactured in the UK

ThermaCoil Direct Thermal Store Schematic

ThermaCoil Direct Thermal Store Product Construction – Typical

Immersion heater ☞ 3kw, 240V, 1ph, Incoloy 825, with thermostat incl. cut-out
Thermal insulation ☞ CFC/HCFC free, (ODP=0, GWP=1), 60mm fire retardant insulation*
Outer casing ☞ P200 Plastisol
Inner cylinder ☞ Duplex stainless steel
Heating coil ☞ High performance, finned
Indirect thermostat ☞ Twin thermostat with independent reset, 30-70ºC

ThermaCoil Direct Thermal Store Product Specification

Pressure test☞ Tested to 10 bar
Approvals☞ BBA, CE, WRAS, KIWA, ISO, WRC
Guarantee☞ Internal cylinder 10 years* Ancillary components 3 year
Direct thermostat☞ Element thermostat, nominal setting 87ºC
Indirect model ☞ 22mm diameter stainless steel high performance coil & outlet with 1 immersion heater
Direct model ☞ 150L – 255L fitted with 2 immersion heaters
Manufacturing ☞ All UK using state-of-the-art robot technology

To download or print digital copies of ThermaCoil product guides, brochures, installation manuals and user guides simply enter your email address below.